掌握圆环链条的最新加工技术
点击次数：356 更新时间：2013-06-28 来源：
今天我们为大家介绍几种常用的圆环链条的制作流程重点，希望能有所帮助。主动测厚的资料连轧领先工艺、喷丸、挤孔、滚子冷挤压成形、链板高速屡次光亮冲裁、四点铆头、双面打印等新工艺，内行业界开端选用，这在必定程度上提高了链条产物的质量。链条零件通常都选用热处置网带炉进行淬火和回火，质量较安稳，离散度可控制在3－4度。
Today we introduce several commonly used production process key ring chain, hoping to help. Leading active materials thickness and rolling technology, shot peening, hole, roller, chain plate high speed cold extrusion forming repeatedly light cutting, riveting head, double-sided printing and other new technology, at four o 'clock start adept industry selection, the extent, improve the quality of the product chain. Chain parts usually choose heat treatment of mesh belt furnace for quenching and tempering, quality is stable, the discrete degree can be controlled in 3 to 4 degrees.
链条零件的强韧化处置、渗铬、渗硼、等温淬火以及淬火介质的“以水代油”等新工艺，也相继使用。对链条进行润滑是必须进行的保养，这样不仅可以提高工作效率，还能延长链条的使用寿命。用油泵压力进行喷油润滑，这是由油泵向链条连续供油，这样循环就起到了润滑和冷却的作用。
Chain components of very tough disposal, the chromizing, boronizing, isothermal quenching and quenching medium of new technology, such as "generation of oil to water and use. The chain lubrication maintenance is a must, such not only can improve the work efficiency, also can prolong the service life of the chain. Using the spray lubrication oil pump pressure, this is from the pump to the continuous oil supply chain, so cycle would have played an important role in lubrication and cooling.
油浴润滑或者飞溅润滑，这是采用密封的传动箱体，把链条的一部分浸入油中，后面的则是靠甩油盘溅油。
Oil bath lubrication or splash lubrication, it is USES the seal of the transmission box, the part of the chain into oil, at the back of the oil pan oil splashing is on.
当前位置：